MITSUBISHI MELSEC Ethernet
- Jongeun Hur (Unlicensed)
| Description | Note |
Distributor | MITSUBISHI |
|
Device | MELSEC NET |
|
Comm. Module |
|
|
Comm. Method | RS232 |
|
Protocol | MC Protocol 3E |
|
Comm. Frame Display | Not supported |
|
Read after write | Supported |
|
To communicate with UltimateAccess Web, MELSECNET/H board must be mounted to the PC’s PCI slot and MNETH Utility software must be installed beforehand.
Communication Settings |
Station
Channel Type: Select the type of the channel based on the MELSECNET/10’s slot location.
COM Block
Station Type: Select the station.
Own Station - Station of MELSECNET/10.
Other Station – Other station.
Network No. Sets the target network number if other station is selected.
Station No. Sets the target station number if other station is selected.
Address Sets the starting address and the amount of words to communicate in one block.
Address Format
Word addresses (W,D…)
[Network No.]:[Station No.][Address Type][Address]
Ex) 00:FFW0 -> Network number 0, 255th station’s W device, address 0.
Bit addresses
[Network No.]:[Station No.][Address Type][Address].[Bit Location]
Ex) 00:FFW0.F -> Network number 0, 255th station’s W device, address 0, 16th bit
Writing to a word device using bit address format is not available.