Samsung BRAIN SPC Series (Serial)

For creating a new device activate the menu [Tools] → [I/O Devices] or the icon in the toolbar. The following picture shows the first step in creating a new device.

Open

I/O Device Name: Give the device a name. This name will be used in the tag configuration window of the database accompanied by the ‘Station Name’.

I/O Device Name: SAMSUNG BRAIN Series

After selecting the [Ok] button of the previous step, the ‘Serial Communication Configuration’ dialog box will be popup as shown in the following picture:

Open

In this window, select the Device Type ‘SAMSUNG BRAIN Series’ and configure the proper serial communication parameters. Ensure that those parameters are matched with the device's configuration. See the Communication Configuration section for more information.

Move to the [Station] tab of the ‘Serial Communication Configuration’ dialog box. In this dialog box, all the connected PLC stations can be configured and registered to the Xpanel.

Open

Each field can be configured with the following rules:

Give a name to the PLC.

This name will be used in the database window accompanied by the ‘Device Name’.

Choose the type of connected PLC among the ‘SPC Series’.

N/A

Specify a decimal number between 1 and 190. The PLC station number must match this number.

This option swaps bytes for all word- or double-word-sized data. The following diagram shows an example of byte-swapping:

Open

Almost all data types will be influenced by this option except INT8 / UINT8 / BCD8 / UBCD8.

This option swaps words of all double-word-sized data. The following diagram shows an example of word swapping:

Open

Tag values with data types INT32 / UINT32 / BCD32 / UBDC32 / FLOAT will be influenced by this option.

Swaps the upper and lower bytes of string word data.

This field has no effect. This driver always uses a BCC checksum.

Use a pop-up message when a communication error occurs.