Add device

Add from scan program

1. Right-click on the scan program to register

Open

Drag & Drop registration in scan program

1. The contact (1), instruction (2), rung (3) and coil (4) can be registered to the device monitor by drag & drop.

Open

*Drag & Drop is not possible after multiple selection. If you want to register multiple devices at once, please use the "Add Continuous" button or the "Add from scan" button.

Registration via pop-up menu

1. Right-click device registration in device monitoring tab

Registration via "Add" button

1. Registration via the Add button at the bottom of the Device Monitor tab

2. When adding a device, 3 types can be selected and registered

*The basic type is set according to the device area. In the case of bit device, Word and Dword type are available when the last last digit is 0, but it can be monitored only by bit device if it does not end with 0. (See help device address notation)
*Duplicate devices can not be registered (S area devices can not be registered).

2. All types can be selected if the last digit of the bit device is 0

3. Only the bit type can be selected if the last digit of the bit device does not end with 0

Registration via "Seq. Add" button

1. Registration via the Seq. Add button at the bottom of the Device Monitor tab

• Entering the start device, type, and size registers the devices from the start device to the last device at once.

Registration via "Scan" button

1. Registration via the Scan button at the bottom of the Device Monitor tab

2. Register the devices except the duplication among the devices currently displayed in the scan program in the rung unit.

3. If there are more than 49 users, including the number currently registered, the user is asked to process.

Direct entry registration

1. You can register a device by typing the device directly into the device column.

*The basic type is bit for all available devices, and the default type for devices that can be used only for Word is registered as Word.