Low Alarm Set Value (Address "129"-"144")
Address | Function | R/W | |
Hex | Dec | ||
81H | 129 | CH.1 Low Alarm Set Value | R/W |
82H | 130 | CH.2 Low Alarm Set Value | R/W |
83H | 131 | CH.3 Low Alarm Set Value | R/W |
84H | 132 | CH.4 Low Alarm Set Value | R/W |
85H | 133 | CH.5 Low Alarm Set Value | R/W |
86H | 134 | CH.6 Low Alarm Set Value | R/W |
87H | 135 | CH.7 Low Alarm Set Value | R/W |
88H | 136 | CH.8 Low Alarm Set Value | R/W |
89H | 137 | CH.9 Low Alarm Set Value | R/W |
8AH | 138 | CH.10 Low Alarm Set Value | R/W |
8BH | 139 | CH.11 Low Alarm Set Value | R/W |
8CH | 140 | CH.12 Low Alarm Set Value | R/W |
8DH | 141 | CH.13 Low Alarm Set Value | R/W |
8EH | 142 | CH.14 Low Alarm Set Value | R/W |
8FH | 143 | CH.15 Low Alarm Set Value | R/W |
90H | 144 | CH.16 Low Alarm Set Value | R/W |
In case of 8-channel module, address 137~144 are not used.
To use Low Alarm by comparing A/D conversion value, the Low Alarm Value is assigned based on the Present Value (Offset 11~18).
If the converted value exceeds the Low Alarm Value, the corresponding contact and buffer is set to "Alert"
Configurable range is as shown below.
Output Format | Range | |
Unsigned Value | 0 ~ 16,000 | |
Signed Value | -8,000 ~ 8,000 | |
Regular Value | 4 ~ 20 mA | 4,000 ~ 20,000 |
0 ~ 20 mA | 0 ~ 20,000 | |
1 ~ 5 V | 1,000 ~ 5,000 | |
0 ~ 5 V | 0 ~ 5,000 | |
-10 ~ 10 V | -10,000 ~ 10,000 | |
0 ~ 10 V | 0 ~ 10,000 | |
Percentage | 0 ~ 10,000 | |
To disable High/Low Alarm Value feature, set both bound values to "0".