3.7.2 Page Settings for Frame

Owned by Jessica Reyes (Unlicensed)
Last updated: Sept 28, 2020
2 min read

To display several pages on a single frame, there are more items to be configured beforehand. For instance, the page size and position in the frame must be set up.

You will also be guided to set the frame file as the starting page and switching the pages on runtime.

Page Properties

When you configure the frame, the pages to be used in the frame must be configured beforehand. Select [Tools] – [Page Setup] to set the size and position in the frame of each page. The values assigned to size and position in the frame must be equal to the values assigned in the [Frame Editor].

In the [Page Position] tab, assign height and width values in ‘Size’. The assigned values must be identical to the values assigned in the [Frame Editor].

Select the ‘Position in Frame’ and press the [Copy] button.

The entire pages to be used in the frame must be configured as mentioned above. If any of the pages are configured incorrectly, the frame may not be displayed properly.

Starting Page Setup

Select [Tools] – [XPANEL Configuration] or the  icon to bring up the window as shown below. You may assign a frame file as a starting page in the [XPANEL Configuration] window.

The frame files are listed in the dropdown list for starting page selection, after the list of the individual pages.

Â