Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

  1. Connect EtherCAT cable between RJ-45(OUT) of PS08N and the RJ-45(IN) of Servo driver.

  2. Connect CICON to PS08N module.

  1. Before use servo driver, check power, wiring and servo driver parameter.

  1. Download parameter of PS08N Master setting to the PS08N module.

  1. You can monitor status of axis after parameter download. If axis error occurs, you can find out how to reset error when you double click the error code.

  2. Make a program by CICON.

  • No labels