Dimension & Wiring (CM0-TB32DIRC/DORC/AIR)

1. CM0-TB32DIRC

• Dimension & Appearance

Open

• Wiring
  ▶ CONNECTOR ↔ CM0-SCBxxDIR ↔ CM1-XD32E

Open	Open ※ CM0-SCBxxDIR

Open	Open ※ CM0-SCBxxDIR

Open

• TERMINAL

Open

※ 입력전압이 내부적으로 연결되어 있어, 접점만 연결하여 신호를 입력할 수 있습니다.

2. CM0-TB32DORC

• Dimension & Appearance

Open

• 결선도
  ▶ CONNECTOR ↔ CM0-SCBxxDIR ↔ CM1-YT32E

Open	Open ※ CM0-SCBxxDIR

Open	Open ※ CM0-SCBxxDIR

Open

※ CM0-TB32DORC 내부 회로 구성상 SINK TYPE(CM1-YT32E) 출력 모듈만 사용 가능합니다.

• TERMINAL

Open

※ Outputs a signal with the internal relay. Each of them is separated without and COM.

3. CM0-TB32AIR

• Dimension & Appearance

Open

• Voltage/Current DIP Switch Configuration
  
  

  Open

  

※ In case of connecting to CM0-TB32AIR, set the PLC’s DIP switch to voltage, and use the DIP switches of CM0-TB32AIR to select voltage or current.

※ Each channel of CM0-TB32AIR has 2 DIP switches. if any one of these switches in the same channel is wset to current, that channel’s type is set to current. To configure the channel’s type as voltage, both switches must be set to the direction of voltage.

Open	Open
	Part Number	Cable Length
	CM0-SCB10AI	1.0M
	CM0-SCB15AI	1.5M
	CM0-SCB20AI	2.0M
	CM0-SCB30AI	3.0M

※ Please check the polarity first before applying the analog input to the terminal block..

Open