/
Flip-Flop : FF
Flip-Flop : FF
Flip-Flop : FF
Instruction | Device address | No. of Steps | Flag | |||||||||||||||
M | X | Y | K | L | F | T | C | S | Z | D | @D | Int. | Error | Zero | Carry | |||
FF | S | ㅇ | - | ㅇ | ㅇ | ㅇ | - | - | - | - | - | - | - | - | 1 | - | - | ㅇ |
Supported PLC series & Version
XPnF | CPnF | XPnE | CPnE | XPnB | PLC-S | BP | XPnA/1R | CP3A/B/P/U | CP4A~D/U |
v6.13 | - | - | - | v6.14 | v6.14 | - | - | - | - |
FF
Reverses the output status of the device designated by D when the execution command is turned OFF -> ON.
Device | Device Status | |
Prior to FF Execution | After FF Execution | |
Bit device | OFF | ON |
ON | OFF | |
Bit designated for word device | 0 | 1 |
1 | 0 |
Program
The following program reverses the output of Y10 when X9 goes ON.
[Ladder Mode]
[Timing Chart]
, multiple selections available,
Related content
Flip-Flop : FF
Flip-Flop : FF
More like this
Input and Output Signal - PLCS AD/DA
Input and Output Signal - PLCS AD/DA
More like this
RAMP (Ramp Signal)
RAMP (Ramp Signal)
More like this
End Main Routine Program
End Main Routine Program
More like this
Output for a Scan at Rising and Falling Edge
Output for a Scan at Rising and Falling Edge
More like this
F : 특수 릴레이
F : 특수 릴레이
More like this