Start Operation, Series Connection, Parallel Connection for Rising-Falling Edge
- CIMON (Unlicensed)
Start Operation, Series Connection, Parallel Connection for Positive-Negative Transition Contact: LDP, LDF, ANDP, ANDF, ORP, ORF
Instruction | Device address | No. of Steps | Flag | |||||||||||||||
M | X | Y | K | L | F | T | C | S | Z | D | @D | Int. | Error | Zero | Carry | |||
LDP LDF ANDP ANDF ORP ORF | S | o | o | o | o | o | o | o | o | - | - | - | - | - | 1 | - | - | - |
LDP (Load Pulse)
This function is used to read the positive transition contact of a circuit
If an input condition is turned ON from OFF, this turns the device ON for one scan.
LDF (Load Falling Pulse)
This function is used to read the negative transition contact of a circuit.
If an input condition is turned OFF from ON, this turns the device ON for one scan.
ANDP (AND Pulse)
This function is used to read the positive transition contact in series connection.
If an input condition is turned ON from OFF, this turns the device ON for one scan.
If the left connection is turned ON, the right connection turns ON for one scan.
ANDF (AND Falling Pulse)
This function is used to read the negative transition contact in series connection.
If an input condition is turned OFF from ON, this turns the device ON for one scan.
If the left connection is turned ON, the right connection turns ON for one scan.
ORP (OR Pulse)
This function is used to read the positive transition contact in parallel connection.
If an input condition is turned ON from OFF, this turns the device ON for one scan.
If the below connection is turned ON, the above connection turns ON for one scan.
ORF (OR Falling Pulse)
This function is used to read the negative transition contact in parallel connection.
If an input condition is turned OFF from ON, this turns the device ON for one scan.
If the below connection is turned ON, the above connection turns ON for one scan.