Grounding (CM-eXT-12W)

● When grounding to the rear face FG terminal of the Xpanel, (on the Power Input Terminal Block), be sure to create an exclusive ground.

● When connecting an external device to the Xpanel with the SG terminal, ensure that no short-circuit loop is created when you setup the system.

● FG terminal is in the input power side. Connect the grounding cable to the FG .

● Connect the FG terminal on the power supply to an exclusive ground. (Refer to the figure below)

● If the grounding causes operational errors, please detach the FG terminal.

CIMON Xpanel