19.3.1 Prerequisites and Execution

Owned by Christian Heilman (Unlicensed)
Last updated: Mar 04, 2021 by CIMON (Unlicensed)
2 min read

(1) Prerequisites

You must use an ATIVA-TOUCH PC (CM-NP/iNP), installed with keylock for PC Runtime. Since the keylock is included when you purchase the ATIVA-TOUCH PC, you will only need to check the keylock when the PC Runtime is not executed.

The device model assigned to the project in XpanelDesigner versions 2.52 and above must be CM-NP/iNP.

When you create a new project, select the ‘CM-NP/iNP (1024x786)’ option in the ‘Type’ field.

If you wish to execute the existing project in an ATIVA-TOUCH PC (CM-NP/iNP), the project will need to be converted. In this case, select [Tools] -> [Project] -> [Convert…] and assign the model as CM-NP/iNP. If you need to back up the current project file, select the ‘Back Up’ option then initiate converting.

(2) Execution

Press the icon to execute the PC Runtime. If the model of the project is not CM-NP/iNP, then the PC Runtime will not execute.

If the model of the project is CM-NP/iNP but executed in a general PC, XpanelDesigner will only create a runtime project. The actual PC Runtime will not execute.

The PC Runtime will only be executed properly when the model of the project is CM-NP/iNP, and the project corresponds with the correct ATIVA-TOUCH PC.

Â