8.3.1 Functions for Security

Returns the current security level.

n=GetSecurity()

Returns the current security level and stores the value to the variable.

Stores the current security level to the variable “Slevel”.

Var Slevel;

……

Slevel = GetSecurity();

Logs on with the provided user information.

LogOn(“UserID”,”Password”)

Logs on with a user ID and password that are registered with the ‘Security’ feature. If the wrong information is used, one of the following messages will pop up:

Open

Open

Logs on with the user ID “ATIVA”, password “0000”.
LogOn(“ATIVA”,”0000”);

Brings up the User Log On window.

LogOnWin()

Brings up the User Log On window on Xpanel. If there is no registered user in the project, the window will not appear.

Select a user and enter the password. If you enter the wrong password, a message will pop up as shown below.

You can change the password by pressing the [Password] button on the User Log On window. If you press the button, a message box will pop up asking if you want to change the password.

Press the [Yes] button to continue to the ‘Change password’ dialog box.

P/W: Enter the old password.

New P/W: Enter the new password.

Confirm P/W: Enter the new password again.

You can apply the new password to the ID by pressing the [OK] button.

Brings up the User Log On window.
LogOnWin();

Logs out the current user.

LogOff();

Logs out the current user.

Logs out the current user.

LogOff();