Calibrating Xpanel through Xpanel Designer |
If the current Xpanel device has excessively mislocated touch points, unable to use mouse, and the ‘Hold Time (sec) for Touch Calibration’ option is disables, you can only start the touch calibration through Xpanel Designer.
a) Select Online -> Xpanel Touch Calibration. Select the target device in the following window.
b) When the connection is successful, a message will pop-up as shown below.
c) On the Xpanel device, the calibration window will appear as shown below.
d) Follow the instruction and then reboot the Xpanel to save the calibration settings.
|