Functions for Security

Type	Format	Description
Function	GetSecurity()	Returns the current security level.
Subroutine	LogOn(“UserID”,”Password”)	Logs on with the user information.
Subroutine	LogOnWin()	Brings up the User Log On window.
Subroutine	LogOff()	Logs out the current user.

GetSecurity	Returns the current security level.
Function	n=GetSecurity()
Description	Returns the current security level and stores the value to the variable.
Example	Stores the current security level to the variable “Slevel”. Var Slevel; …… Slevel = GetSecurity();

LogOn	Logs on with the user information.
Subroutine	LogOn(“UserID”,”Password”)
Description	Logs on with the user ID and password that is registered to ‘Security’. If the wrong information is used, one of the messages shown below will pop up.
Example	Logs on with the user ID “CIMON”, password “0000”. LogOn(“CIMON”,”0000”);

LogOnWin	Brings up the User Log On window.
Subroutine	LogOnWin()
Description	Brings up the User Log On window on Xpanel. If there is no registered user in the project, the window will not appear. Select a user from the dropdown menu, or type in the user ID, then enter the password. If you enter a wrong password, the message will pop up as shown below. You can change the password by pressing the ‘Password’ button on the Log On window. Once pressed, a message box will pop up asking if you want to change the password. Press the ‘Yes’ button to go to the ‘Change password’ dialog box. P/W: Enter the old password. New P/W: Enter the new password. Confirm P/W: Enter the new password again. You can apply the new password to the ID by pressing the ‘OK’ button.
Example	Brings up the User Log On window. LogOnWin();

LogOff	Logs out the current user.
Subroutine	LogOff();
Description	Logs out the current user.
Example	Logs out the current user. LogOff();