Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

▶  CPU, Power, Base and Communication can be redundancy.

▶  Redundancy is configured Primary base and Secondary (Standby) base.

▶  As Primary CPU occurs error, Secondary CPU will cover up immediately without any interruption.

▶  There is switch on the interface module (CM1-RM01A/CM1-RM01B) for easy maintenance.

▶  Network redundancy is also possible.

▶  Delay of scan time is less than 50ms to switch Primary to Secondary base.

(The delay may vary depending on the volume of the program.)

▶  Power in expansion base can be redundancy.

▶  Redundancy system must be configured with at least 1 expansion base.

  • No labels