Installation
● Create a panel cut and insert the Xpanel into the panel from the front.
Unit: mm
Fastener
● Attach the Installation Fasteners from inside of the panel. Insert each hook of fasteners into the slot and tighten it with a screwdriver.
● Tightening the screws with too much force can damage the case of the Xpanel. ● The necessary torque is 0.50.5kgf.cm. ● The torque of front USB cover must be less than 1 kgf.cm. ● Depending on the thickness of installation panel, the number of installation fasteners used may need to be increased to provide the desired level of moisture resistance. |
|---|
Safe distance
● For the performance and safe use of the equipment, please keep the distance between the back of the main unit and each all of the container at least 100 mm.
Add Comment