Double-click [Data Logging] on the Project workspace or select [Tools] – [Data Logging] to bring up the configuration window as shown below.
Item | Description | |
Model Name | Enter the name of the Data Logging model. You may use alphanumeric characters, Korean alphabets and special characters as the model name. You cannot use the duplicated model name. | |
Logging At | Tag value changes | The data is logged only when the tag value changes. Since this option does not collect data at a regular interval, the file size can be reduced. The system cannot recognize the change in value less than a second. |
Regular Interval | The data is logged according to the assigned interval. You can assign the interval from 1 to 10,000 seconds. (166min 40sec) | |
A minute Interval | The data is logged at every minute. | |
I/O Device’s Log Data | You can collect the data from the CM1-LG32A PLC module. | |
Interval | Assign the data logging interval in second unit. You can assign the interval from 1 to 10,000 seconds. (166min 40sec) | |
Add | Adds a new model with the configuration. You cannot add a new model if there is a model with same name. | |
Ok | Saves the changes of the selected Data Logging model. | |
Delete | Deletes the selected model. | |