Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

Version 1 Current »

It is used to get value from temperature module. There are two types FBs which get digital output value.

 

Example)

AD_M : It is used to get more than two digital values. D device is fixed to save this value. Type the address on "ADDR" and type number of channels on "SIZE".(If you want to get the values from Channel 1~3, type 3. It will get a value from channel no.1 always.)

AD_S : It is used to get only one digital value. Output Device is fixed to save this value and can use Word type device (D15, M70, K110 and etc.). Type channel number on "CH". (If you want to get a value from Channel no.3, type 3)

 

 

  • No labels