This driver uses a standard Ethernet connection to communicate with Mitsubishi MELSEC Ethernet devices such as FX5, Q/L.

Communication Settings: Xpanel

I/O Device Configuration

To create a new device, click Tools > I/O Device Editor… > click the + icon > click Ethernet for Connection Type > select Mitsubishi MELSEC Ethernet for Device Type.

I/O Device Settings

Once the connection type, device name, and device type have been assigned, the I/O Device Editor window populates with the default settings for the selected communication protocol.

After selecting the correct Connection Type and Device Type, match the remaining settings to the target I/O device’s communication settings.

See the Ethernet Communication Configuration section for more information.

Address and Supported Symbols

The memory areas listed below are provided for general purposes. The actual available memory area and range of each area should be checked with the manual for the connecting device.

The symbol character has to be placed in the first position of the address string. The address number follows the symbol character.

Supported Symbols

Name	Symbol	Bit Range	Word Range	Address Number System	Access

Name	Symbol	Bit Range	Word Range	Address Number System	Access
Input	X	X0000 - X1757 (1777)	-	Octal	R
Output	Y	Y0000 - Y1757	-	Octal	R
Internal Relay	M	M0000 - M7659	-	Decimal	R/W
Latching Relay	L	L0000 - L7659	-	Decimal	R/W
Annunciator	F	F000 - F107	-	Decimal	R/W
Edge Relay	V	V0000 -V2029	-	Decimal	R/W
Link Relay	B	B000 - B0EF	-	Hexadecimal	R/W Not supported for iQ-F FX5
Step Relay	S	S0000 - S4079	-	Decimal	R/W
Timer Contact	TS	TS000 - TS496	-	Decimal	R/W
Timer Coil	TC	TC000 - T496	-	Decimal	R/W
Retentive Timer Contact	SS	SS00 - SS00	-	Decimal	R/W
Retentive Timer Coil	SC	SC00 - SC00	-	Decimal	R/W
Counter Contact	CS	CS000 - CS240	-	Decimal	R/W
Counter Coil	CC	CC000 - CC240	-	Decimal	R/W
Link Special Relay	SB	SB000 - SB1EF	-	Hexadecimal	R/W
Special Relay	SM	SM0000 - SM9979	-	Decimal	R/W
Data Register	D	-	D0000 - D7999	Decimal	R/W
Link Register	W	-	W000 - W1FF	Hexadecimal	R/W
Timer CV	TN	-	TN000 - TN511	Decimal	R/W
Retentive Timer CV	SN	-	SN00 - SN15	Decimal	R/W
Counter CV	CN	-	CN000 - CN255	Decimal	R/W
Link Special Register	SW	-	SW000 - SW1FF	Hexadecimal	R/W
Special Register	SD	-	SD00000 - SD11999	Decimal	R/W

Communication Cable Wiring

This interface is satisfied with standard IEEE802.3 about the 10BaseT/100BaseTX. You can configure the cable and allocation pin number of RJ45 as shown below.

RJ45 Connector	RJ45 Jack

Direct Cable: Host ↔︎ HUB

Cable	No.	Color	Color	No.	Cable
	1	Orange/White	Orange/White	1
	2	Orange	Orange	2
	3	Green/White	Green/White	3
	4	Blue	Blue	4
	5	Blue/White	Blue/White	5
	6	Green	Green	6
	7	Brown/White	Brown/White	7
	8	Brown	Brown	8

Crossover Cable: Host ↔︎ Host

Cable	No.	Color	Color	No.	Cable
	1	Orange/White	Green/White	1
	2	Orange	Green	2
	3	Green/White	Orange/White	3
	4	Blue	Blue	4
	5	Blue/White	Blue/White	5
	6	Green	Orange	6
	7	Brown/White	Brown/White	7
	8	Brown	Brown	8

CIMON-Canvas v2.0.0