|
|
|---|
Exercise: Checking the Alarm Contents with Alarm Summary
1. Alarm Configuration
a) Create an INT16 tag named STORAGE. Select [Tools] > [Alarms] to bring up the [Alarms] window. Add 2 alarms. Configure an alarm for the tag STORAGE with the condition of “greater than 200” and configure another alarm with the condition of “greater than 300”. Enter the [Alarm Name] as “Exceeded 200 L” and “Exceeded 300 L”.
b) Select [Insert] > [Alarm Summary] and click the page to add the alarm summary object. To configure the object, change the parameters within the [Property Editor].
c) Since the operation will be checked by manually changing the tag value, add an object to the page, and use the [Action Command(s)] feature within [Property Editor] as shown below.
2. Checking the Operation
a) Upload the project to the user’s Xpanel or execute the simulator to check the operation. Click the object that writes 201 to the tag “STORAGE”. An alarm will occur and you can check the contents of the alarm.
b) Click the object that writes 301 to the tag “STORAGE”. An alarm will occur and you can check the contents of the alarm.
c) Click the object that writes 201 to the tag “STORAGE” again. The “Exceeded 300 L” alarm will clear and the “Exceeded 200 L” alarm will remain active.
