Users can start the touch calibration from the Xpanel device using one of two methods.
(1) Calibration via the [Xpanel Settings] Menu
a) To open the [Xpanel Settings] menu, tap the bottom left, bottom right, and top right corner of the Xpanel’s screen in the order outlined in the below image.
b) Once the corners have been pressed in the proper order, the [Settings] menu will open. Press the [Exit] button to exit the project to the [Control Center].
(c) Once the [Control Center] window is open, press the [Settings] button to open the [Xpanel Settings].
(d) In the [Xpanel Settings] window, navigate to the [Touch Calibration] menu and press the [Start Calibrate] button.
e) Follow the prompts on the Xpanel screen to calibrate the touch screen.
For reference, the order of calibration touchpoints is displayed below.
(2) Unable to open [Xpanel Settings]
If for any reason the user is unable to open the [Xpanel Settings] menu, press and hold on a random point on the Xpanel’s screen for 30 seconds to start the touch calibration. The calibration screen should resemble the above image when opened. Once the calibration screen has opened, follow the prompts on the screen to complete calibration.