Calibrating Xpanel through XpanelDesigner
If the current Xpanel device has excessively mislocated touch points, unable to use the mouse, and the ‘Hold Time (sec) for Touch Calibration’ option is disabled, you can only start the touch calibration through XpanelDesigner.
a) Select [Online] - [Xpanel Touch Calibration]. Select the target device in the following window.
b) When the connection is successful, a message will pop-up as shown below.
c) On the Xpanel device, the calibration window will appear as shown below.
d) Follow the instruction and then reboot the Xpanel to save the calibration settings.
