Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

XpanelDesigner is a software that allows users to create projects. You can download any version of the software on the CIMON website (www.cimon.com).

NOTE

  • When you install XpanelDesigner, check for the software version compatible with your product.

  • A project created in a higher version cannot be executed in a lower version.

  • To establish connection between your PC and HMI, you must download a separate program according to the following OS versions:
    If your OS version is Windows XP, ‘ActiveSync’ is required.
    If your OS version is Windows 7 and above, ‘Windows Mobile Device Center’ is required.
    You can download each program on Microsoft website (www.microsoft.com).

In order to use the project properly, please check if a model is compatible with the software version. Please refer below for Xpanel models and their non-applicable versions.

Products that are not supported by XpanelDesigner versions 2.11 through 2.35

CM-XT05

CM-XT06

CM-XT10CA

CM-XT12CA

 

Products that are not supported by XpanelDesigner versions 2.40/2.50/2.52

CM-XT04CB

CM-XT05MB

CM-XT05SA

CM-XT05SB

CM-XT06CB

CM-XT07CB

CM-XT10CC

CM-XT10CB

CM-XT12CB

CM-XT12CA

Installation of Xpanel Designer

Follow the steps below to download the XpanelDesigner.

a)     Go to the CIMON website (www.cimon.com), and register for an account. Make sure to be logged in before proceeding.

b)     Go to [Download] on the top right > [ATVXEL DESIGNER] in the middle of the webpage.

c)      Or navigate to [Support] at the top > Set the filter as shown below, then you can easily find the list of software. Find the Xpanel Designer version you wish to download.

d)     Click the download file at the bottom of the page.

e)     Execute the installer file on the directory.

f)      Wait until the Installshield program is executed. It may take a while depending upon the system environment.

g)     Read the End User License Agreement. You must accept the agreement to continue the installation. Select a button labeled ‘Accept’ and press [Next].

h)     Specify the location of Xpanel Designer and press [Next] button. If you have not changed the path, software will be installed in ‘C:\CIMON\XpanelDesigner “Version”’ as default. The default path may differ depending on the version of Xpanel Designer.

  • Xpanel Designer 2.50 and below versions are installed in ‘C:\CIMON\Xpanel’ by default. If you install the higher version upon the lower version, the program will automatically upgrade the software version.

  • From Xpanel Designer 2.52 version, the software is installed in the separated path.

i)       Now it is ready to install the software. Press [Install] button to begin the installation.

j)      A ‘Font Select’ window will appear as the installation starts. Fonts in the PC are listed in the left side of window. You may add or except the selected fonts for using in the project.

NOTE

The use of illegally downloaded fonts can be subject to legal action, and Cimon will not be held liable in such cases. Please make sure to look up the license of any font you wish to use in the Xpanel project.

k)     Press [Finish] button to end the Xpanel Designer installation.

l)       Launch the Xpanel Designer to check if the installation is successfully done.

  • No labels