Installation
● Create a panel cut and insert the Xpanel into the panel from the front.
Unit: mm
Fastener
● Attach the Installation Fasteners from inside of the panel. Insert each hook of fasteners into the slot and tighten it with a screwdriver.
● Tightening the screws with too much force can damage the case of the Xpanel. ● The necessary torque is 0.50.5kgf.cm. ● The torque of front USB cover must be less than 1 kgf.cm. ● Depending on the thickness of installation panel, the number of installation fasteners used may need to be increased to provide the desired level of moisture resistance. |
|---|
Safe distance
● For the performance and safe use of the equipment, please keep the distance between the back of the main unit and each all of the container at least 100 mm.
