...
b) When “WatchM.exe” is executed for the first time, its initial mode is set to ‘Monitoring’. In the ‘Monitoring Settings’ section, the settings can be modified.
...
c) After the monitoring configuration, press “Save” button to save the configuration. WatchM will operate according to the new configuration from the next CimonX’s execution. The configuration information is stored in CimonX.ini file as shown below.
...
Items | Settings | |
Monitoring Mode | 0 | Manual run and exit. |
1 | Automatic run on CimonX execution and manual exit. | |
Timeout(Sec) | The value can be assigned from 1 to 32767. | |
(Memory Check | 0 | Not use |
1 | Use | |
Memory Threshold | The value can be assigned from 10 to 99. | |
d) After the configuration of WatchM, the operation of WatchM can be checked on the system status message as shown below.
In case WatchM is not enabled, or the configuration is not saved, a message will appear as shown below.
...
After saving the configuration, and if WatchM is operating when CimonX is running, the message will appear as shown below.
...