19.3.1 Prerequisites and Execution
- Christian Heilman (Unlicensed)
- CIMON (Unlicensed)
- Scott Fredericks (Unlicensed)
- Jessica Reyes (Unlicensed)
(1) Prerequisites
You must use a POWERTRAN-TOUCH PC (CM-NP/iNP), installed with keylock for PC Runtime. Since the keylock is included when you purchase the POWERTRAN-TOUCH PC, you will only need to check the keylock when the PC Runtime is not executed.
The device model assigned to the project in XpanelDesigner versions 2.52 and above must be CM-NP/iNP.
When you create a new project, select the ‘CM-NP/iNP (1024x786)’ option in the ‘Type’ field.
If you wish to execute the existing project in a POWERTRAN-TOUCH PC (CM-NP/iNP), the project will need to be converted. In this case, select [Tools] -> [Project] -> [Convert…] and assign the model as CM-NP/iNP. If you need to back up the current project file, select the ‘Back Up’ option then initiate converting.
(2) Execution
Press the icon to execute the PC Runtime. If the model of the project is not CM-NP/iNP, then the PC Runtime will not execute.
If the model of the project is CM-NP/iNP but executed in a general PC, XpanelDesigner will only create a runtime project. The actual PC Runtime will not execute.
The PC Runtime will only be executed properly when the model of the project is CM-NP/iNP, and the project corresponds with the correct POWERTRAN-TOUCH PC.