Create a new device

To create a new device, select 'Tools' → 'I/O device' in the menu or click the icon in the toolbar. The “I/O device configuration” dialog box will appear as shown below. Click [new device]. From the “I/O Device Selection” dialog box, select a device name and device type as shown:

I/O Device Name: Set a device name. This name will be used in the tag configuration window of the database, accompanied by the ‘Station Name’.

Select a device type

After selecting the ‘OK’ button in the previous step, the ‘Serial Communication Configuration’ dialog box will appear as shown in following picture.

In this window, select ‘PGuard gateway’ as the device type, then configure the remaining communication parameters appropriately. These parameters must be matched with the PGuard device.

Create a station

Move to the [Station] tab of the “Serial Communication Configuration” dialog box and click the [Add Station] button. The “Station” dialog box will appear. Configure the options as shown below, then click the “OK” button.

• Only register 1 station for the ‘PGuard gateway’ driver. Registering more than 1 station may result in a malfunction. However, you may create multiple 'PGuard Gateway’ devices, each with a separate station.

Station Name: Give a name to the PLC. This name will be used in the database window, accompanied by the 'Deviec Name' .

Station Type: Choose the 'SGW'.(No other type can be slected)

Network ID: This field has no effect.

Station No: Write designated station No. in PLC

16Bit Data Swap: This field has no effect.

32Bit Data Swap: This field has no effect.

Using checksum: This field has no effect.

Comm. Error Message Pop Up: If this item is checked, Xpanel displays a communication error notification message for every Rx and Tx error. Otherwise (unchecked), Xpanel does not display the message for data receive errors. Only when there is a data transmit error (writing a tag value to the station) will the notification message pop up. The message box will close automatically after 5 seconds.