Adds a new device by IP address.

Deletes the selected device.

Searches for connectable devices on the same network(s) and retries connection with manually added devices.

Allows the user to search the table for portions or entire IP addresses.

Displays all IP addresses of connectable devices and manually added devices.

Displays all names of the projects currently downloaded on connectable device and manually added devices.

Displays all port numbers of connectable devices and manually added devices.

Displays ONLINE if the device can communicate with the current device and OFFLINE if it cannot.

Displays all hostnames of connectable devices and manually added devices.

Opens a selection of Canvas Viewer or Runtime Settings without closing Runtime.

Opens the Frame & Tag Monitor that displays all changes to frame or tag data.

Opens the System Log window that displays all project changes and plugin or translation installations.

Opens the User Management window where users can be changed and logged in.

Opens the Notifications window that displays a list of all notifications.

Opens the About Canvas Viewer window that displays the current Canvas Viewer version and software acknowledgments.

Closes Runtime and goes to the Control Center.

A toggle to enable the web server on the Xpanel.

A toggle to enable autorunning the FTP server on startup.

Starts or stops the FTP server.

Enable or disable write access in the FTP server.

Permits the access of the USB in the FTP server.

Permits the access of the SD in the FTP server.

Permits the access of the local memory in the FTP server.

Change the password for the FTP server.

A toggle to autorun the VNC server on startup.

A button to start or stop the VNC server.

Name of the panel on the network.

Sets the primary Domain Name System for the xpanel to use.

Sets the secondary Domain Name System for the xpanel to use.

Sets the configuration for how the IP should be set within the network.

Static

The IP will have to be manually configured for the network.

DHCP

The IP will be dynamically set based on the network. All settings will be unable to be edited with this setting picked for the specific config.

Sets the IP Address of the xpanel within the network. This option can only be changed if the Address Type is static.

Sets the Subnet Mask for the the xpanel within the network. This option can only be changed if the Address Type is static.

Sets the default gateway for the xpanel within the network. This option can only be changed if the Address Type is static.

Sets the MAC Address for the device. This option cannot be editted.

Will apply all changes made to the network settings and save them.

Will automatically restart the program if an error has occurred within.

Set how many seconds to wait before the application is restarted.

Enables a beep sound after the user touches the screen on the xpanel.

Sets the volume for the xpanel. This does not include the Touch Beep.

Change the Font Size for text within the Xpanel.

Sets the orientation of the Screen. Options include 90 degrees, 180 degrees, 270 degrees, and Standard.

Sets the brightness for the Xpanel.

Sets how many minutes to wait before the Xpanel starts to dim.

Sets the percentage of how much to dim the screen of the Xpanel.

Sets the system time of the Xpanel via user input of the time.

Syncs the time of the xpanel with the current time of the network it is connected to.

Sets the timezone of the Xpanel.

Sets the default language of the Xpanel.

Saves the System language and immediately makes the changes needed.

Lists all detected devices connected via USB or SD Card. Clicking a valid device allows the user to select a destination folder and project.

Selects between Xpanel to External Device and External Device to Xpanel. This determines if a project will be downloaded from an Xpanel and saved onto an External Device or vice versa.

After choosing a device and clicking Select, allows users to choose a valid destination to save the current project to or a “.cnvs” file to download a project to the Xpanel.

Transfers the project using the selected direction.

Starts an interactive procedure to calibrate the touchscreen.

The device will be placed into recovery mode, which allows the firmware to be reinstalled, upgraded, or downgraded using a software upgrade file (.swu). Chooses between External Storage or Web Server to select a device.

Lists all detected devices on the chosen External Storage or Web Server. Clicking a valid device allows the user to select a software file.

After choosing a device and clicking Select, allows users to choose a valid “.swu” file for firmware reinstallation, upgrade, or downgrade.

Enters the recovery mode process after a warning prompt.

Clears all project, log, and CSV data from the device. Also resets all options in the settings app to their factory defaults, including all passwords. Installed applications and external storage will not be afffected.

Begins an interactive test of the HMI hardware.

Toggles the display mouse cursor on the device screen.

Set a password to restrict users froim acessing the Settings app.

The Xpanel device will be shut down and restarted. Runtime will automatically reload the project if one is present.