21.3 Communication Configuration

Open

Xpanel communication settings can be configured in the ‘Communication Setup’ menu. The Ethernet settings shown in the 'Ethernet' tab are the same as the settings in the ‘Xpanel Ethernet Loader’ window.

Open

In the 'IO Device' tab, you can configure the settings for specific I/O devices, including serial devices. These match the settings of XpanelDesigner's ‘I/O Device’ menu.

After the 'Communication Setup' settings are modified, the Xpanel Application Program must be restarted in order to apply the changes.

※ Note: If a project is downloaded from XpanelDesigner to Xpanel, the XpanelDesigner ‘I/O Device’ settings will replace the Xpanel settings in the 'IO Device' tab.