▶ CPU, Power, Base and Communication can be redundancy.
▶ Redundancy is configured Primary base and Secondary (Standby) base.
▶ As Primary CPU occurs error, Secondary CPU will cover up immediately without any interruption.
▶ There is switch on the interface module (CM1-RM01A/CM1-RM01B) for easy maintenance.
▶ Network redundancy is also possible.
▶ Delay of scan time is less than 50ms to switch Primary to Secondary base.The delay may vary depending on the volume of the program.)
▶ Power in expansion base can be redundancy.
▶ Redundancy system must be configured with at least 1 expansion base.
0 Comments