Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

  1. Supports CIMON Loader protocol.

  1. Supports reading and writing data through HMI protocol.

  1. With built-in MODBUS RTU Master, easy data acquisition from MODBUS RTU Slave devices is supported.

  1. With built-in MODBUS RTU Slave, data access to PLC via MODBUS RTU Master is supported.

  1. Supports User Protocol, allowing the users to create customized RX/TX frames.

  1. Supports wide range of communication speed (300 bps-76800 bps).

  1. Modem is built in some of serial modules to control remote PLCs(RS-232C).

  1. 1:1 / 1:N / N:M (RS-422/485) supported.

  1. Full-Duplex (RS-422) and Half-Duplex (RS-485) supported.

10. Maximum 32 units HMI communication (RS-422/485) supported.

11. RS-422/485 channels have photocoupler insulation to prevent noise.

12. RS-232C and RS-422/485 communication ports can be used as independent channels or linked channels.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.