/
5.6.5 Rotation/Flip
5.6.5 Rotation/Flip
- Jessica Reyes (Unlicensed)
Owned by Jessica Reyes (Unlicensed)
This feature is enabled when you select one or more objects. You can rotate or flip the selected objects. Refer to the table below for commands with examples.
Item | Description | Example |
90’ Clockwise |
It rotates the selected objects 90 degrees clockwise based on the center point. |
 |
90’ Counterclockwise |
It rotates the selected objects 90 degrees counterclockwise based on the center point. |
 |
Horizontal |
It flips the selected objects horizontally based on the center point of the X-axis. | |
Vertical |
It flips the selected objects vertically based on the center point of the Y-axis. |