Configuring CIMON-SCADA
To properly use the Xpanel Data Server function, you must configure the associated SCADA project as well.
a) In CimonD, select [Tools] – [I/O Device]. Press [New Device] to bring up the [I/O Device Selection] window as shown below. Select ‘CIMON-XPANEL Ethernet’ and designate a name for the device.
b) In the next window, press [Add Station] to enter the configuration of the Xpanel. Press [IP Addr.] to enter the target device’s IP address. You may also assign scan time, time out, etc.
Item | Description |
Station Name | |
c) Press [Add COM Block] button to assign a data block for the communication.
d) Go to [COM Port] tab and enter the local PC’s address.
e) Register a real tag according to the COM block’s data range.
f) Execute CimonX to check the operation.