Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 9 Next »

Allow the user to start/stop the project on the Xpanel(s), reboot the Xpanel Viewer, or update their Xpanel’s software.

  1. On the CIMON Canvas application, click Tools > Connection Setup… and choose which Xpanel you will be using by checking the box on the left-hand side. Please know that if the Status of the Xpanel is “OFFLINE”, the user will not be able to download/upload a project.

Item

Description

Start Project

Initiate the runtime with the current project on the selected Xpanel(s).

Stop Project

Cease the operation of the runtime on the selected Xpanel(s).

Update Canvas Viewer

Upgrade the firmware of the Xpanel to match that of the currently used CIMON Canvas.

Reboot Xpanel

Restart the runtime on the selected Xpanel(s).

 

  • The Subnet Mask and Gateway fields should be configured to match those of the PC. These can be found using the “ipconfig” command.

  • Duplicate IP addresses are not allowed. Make sure the IP address you choose is not being used by another device on the network.

  • The Xpanel IP address must be on the same local network as the PC. If the subnet mask is set to 255.255.255.0, this means the first 3 values of the IP address must match those of the default gateway. If the subnet mask is set to 255.255.0.0, then the first 2 values must match, and so on.

  • No labels