4.1.1 New Project

The user can create a new project by clicking File > New > Project…. You can set the properties of the project in the New Project pop-up window.

Item	Description
Project Name	Enter the name of the project. The project name will be saved as “Sample Project Name”. A duplicate name is not allowed and thus will overwrite the same-named project. The name can be changed in the Property Editor after clicking on the project name in the Project Browser. ※ Refer to the Copy Project section for more information.
Save Location	Specify the path where the project will be saved. The default path is C:\Users\User\. A folder with the project name will be created, and the project file will be saved in the “.cnvs” format in the folder.
Screen Size	The type of project file can be decided according to the dimension of each Xpanel model. You can choose a model from the table below.
	4” Xpanel		7” Xpanel
	10–12” Xpanel		15” Xpanel
	10” IPC		11–15” IPC
	19” IPC		1366 x 768 (PC)
	1440 x 900 (PC)		1920 x 1080 (PC)
	3840 x 2160 (PC)		Custom
W	Allows the user to determine their own custom project-page pixel width. A default selection will be made when selecting any screen size besides custom.
L	Allows the user to determine their own custom project-page pixel length. A default selection will be made when selecting any screen size besides custom.
Password	Checkbox	Sets up the password for the project. The password must be entered with the following criteria. You can use alphanumeric. The password is case sensitive. You cannot use special characters and spaces. You can enter the password up to 8 characters. The password is displayed as “****”.
	Password	Enter the same password to confirm.
	Confirm Password	Saves the password setting.
	The password you selected cannot be retrieved if forgotten.
OK	Creates a project with the entered information.
Cancel	Does not create a project and goes back to the start-up screen.