Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

If the Modbus Slave function is configured, this [Modbus Channel Setting] window can be used to change the Modbus Slave communication settings.

The user can use this function after configuring the MODBUS RTU function in the XpanelDesigner project.

ATVXEL will operate as a Modbus TCP Slave according to the IP address configured in the ‘Ethernet Loader’ or ‘Comm. Config.’ menu.

 For more detailed information, please refer to the MODBUS Slave section.

  • No labels