Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

Communication Setup: PMAC

For normal communication between Xpanel and PMAC, the some I-variables should have the values described below.

Store these values to the non-volatile flash memory with the ‘SAVE’ command. Then turn off power.

 Please refer to PMAC’s manual for more information.

Communication Setup: Xpanel

Create a New Device

For creating a new device, go to [Tools] - [I/O Devices] or click on the (blue star) icon in the toolbar.

The following images shows the first step of creating a new device.

I/O Device Name: Give a device name. This name will be used in the Tag configuration window of the database accompanied by the Station Name.

Select a Device Type

After selecting [Ok] in the previous step, the ‘Serial Communication configuration’ dialog box will show up.

Select ‘DELTA TAU PMAC Drive’ in the Device Type dropdown menu. Then configure the proper serial communication parameters. (9600bps, no parity, 8 data bits, and 1 stop bit recommended)

  • No labels