Page Comparison

New Feature

• IEC61850 new driver

  • Supports MMS data protection function

  • Supports event reception and database auto-save functions using GOOSE communication

  • Support for receiving measurements using sampled values

  • Supports control methods through SBO and Direct Control

  • Check in the online manual

• Added user add/edit/delete function

  • Supports user add/edit/delete functions on the administrator page in the web client.

• Part 11

  • Changed so that signatures and double authentication can be added when recognizing an alarm that has occurred.

• Set time format

  • Users can set their own desired time format and check it on the web.

  • Custom time formats are applied to system logs, alarm summaries, and data logs.

• Alarm

  • The alarm accumulation time and alarm accumulation count settings are activated.

Notice

• Fast Communication driver

  • Added Siemens and Melsec Ethernet drivers with improved communication speeds than before.

Changes

• Part 11

  • Changed so that Part 11 can be activated in the project settings window after running the designer

• Web client

  • Changed so that all collected tag values ​​are displayed when pressing the All tab after running [View past data]

• Page recorder

  • Added log message when starting/stopping the page recorder

• Alarm

  • When you press [ack] a cleared alarm, it is changed to disappear from the alarm summary object.

• Communication driver

  • Changed so that the text message driver transmission/reception history can be displayed in conjunction with the input/output table

  • Applied only to the modem-based "text message transmission/reception service" communication driver

• Trend/chart

  • Improved the time accuracy of trends and charts

  • Changed so that the font size of trend objects can be changed

• Script

  • Modified so that global variables can be declared in the script code

• Other

  • Modified so that Cimon D can be executed multiple times

  • Changed so that chart examples displayed in Cimon D are limited to 10 per line

  • Removed the Paste Select menu

  • Added an error message when the script engine fails to start

Bug Fix

• Communication Driver

  • Fixed a bug that could not communicate with the communication driver set as a dynamic IP in the form of a domain address.

  • The modified communication driver is as follows.

    • Module name : CimonEnet desc: CIMON Net (Ethernet)

    • Module name : CmPlcEnet desc: CIMON-PLC Ethernet

    • Module name : DNP30TCPDDNS desc: DNP 30 TCP DDNS

    • Module name : EtherNetIP desc: Allen Bradley ControlLogix 5000(EtherNet/IP)

    • Module name : GlofaEnet desc: LS GLOFA-GM Ethernet (ENET)

    • Module name : ModbusTCPDDNS desc: MODICON Modbus TCP(DDNS)

    • Module name : SlcEnet desc: Allen Bradley SLC500 Enet

    • Module name : XGIFEnetDDNS desc: LS XGI/XGR/XEC PLC DDNS Ethernet

    • Module name : XGTFEne tdesc: LS XGK/XGB PLC Ethernet

    • Module name : XGTFEnetFT desc: LS XGT PLC Ethernet (Rapid Comm)

• User Data Table

  • Fixed a bug where an error message related to data size occurred and editing was not possible when editing an item with digital or analog data type in the user data table.

• Trend

  • Fixed a bug where the tag values ​​displayed in the legend when hovering over the surveillance area in past mode are displayed as the current values.

• Server Duplication

  • Fixed a bug where the connection was not smooth when changing the URL to the IP of the second web server when the primary web server was terminated.

• Script

  • Fixed a bug where the editor would not close even if the project was closed while the script editor was open.

• REST API

  • Fixed a bug where the web server terminated abnormally when requesting a body with an incorrect format to the web server.

• Event Report

  • Fixed a bug that data is missing during report printing

  • Fixed a bug that other event reports are not collected during report printing.

• Switch/Lamp

  • Fixed a bug that line breaks are not applied when setting labels on switch/lamp objects

• Alarm

  • Fixed a bug that actions by alarm level do not work

  • Fixed a bug that the last setting size of the alarm summary does not match the user setting

  • Fixed a bug that the alarm sound does not turn off when the alarm is cleared

• Page Recorder

  • Fixed a bug that retrieves more page record data than the user-specified time

• Cimon Viewer

  • Fixed a bug that some UIs are cut off on PCs set to low resolution

  • Fixed a bug where the scroll bar was not visible when setting the viewer title bar display.

• Abnormal Termination

  • Fixed an abnormal termination bug due to the use of action definition when closing a page

  • Fixed a bug that Cimon D abnormally terminates when using PNG transparent color

• Other

  • Fixed a bug that does not display correctly when expressed as a negative number when displaying the tag value object screen

  • Fixed an error in the MemoBusEnet communication driver

  • Fixed a bug that a different button is selected while writing tag values ​​on mobile

  • Fixed a bug in writing bits in CmPlcEnet, Modbus RTU Slave Word area

  • Fix Modbus RTU Slave block size specification error

New Feature

• Animation Editor

  • Animation editing is an editing tool that allows you to create new animation bitmaps used in SCADA PRO UltimateAccess Web or edit animation bitmaps that have already been created. By supporting the insertion of external images in bmp, jpg, and png formats, it is possible for users to create a variety of animated bitmaps suited to their work environment. Additionally, you can check the actual movement in advance through the animation preview and animation speed control functions.

Changes

• Page Recorder

  • Page recorder function additionally displays all user information connected during recording.Adjust the position of the page history window when the web browser re-displays itRecorder now displays the list of concurrent users while the Page Recorder was active.

  • Adjusted the location of the Page Recorder overlay on the web browser.

• Command Expression

  • Add a command to connect to a specific web URL and pop-up

  • Add a command expression to display the specified page in the screen call object.

  • Change tag name case insensitivity in ‘TLogVal’ command expressionImpoved the OpenPage, ClosePage, and ReplacePage command expressions to operate with URL operands.

  • Added a command expression, ChangeEmbed("Page Name", "Object Name") to display a specified page in the Page Embedding object.

  • Made TLogVal command expression tag names case-insensitive.

  • Click to find out in online manual

• Alarm

  • Added time display format displayed in alarm summary object.

• Image Update

  • New Project icon embedded in project menuAdded a new project icon in the Project Tree.

• Part 11

  • Added the ability to output data displayed on a chart object in PDF format.

  • Added a function to output the data displayed in the chart to ExcelEnabled chart data export to PDF and Excel.

• 3D Objects

  • Added a function to encrypt 3D model files loaded into the project file encryption to prevent unauthorized modificationchanges.

  • Changed the number of color changes to be set to only 0 to 83D models can have up to 8 color change options.

• Chart / Trend

  Delete Drag function

  • Added Prev/Next user buttons to easily check the next data in historian mode.When you press the Prev/Next user button quickly navigate data frames in historian mode, displaying the next frame is displayed at the current time interval.

  • Improved trend performance when expressing displaying large amounts of data.

• User convenience

  • Improved data input handling when pressing the Enter key in the web client data input window.

Bug Fix

• Command Expression

  • Fixed a bug where pages Pages containing parentheses were not executed now execute with OpenPage.

• Abnormal Process down

  • Fixed a bug where the program terminated abnormally while reading the configuration fileResolved the runtime crash issue while it boots up.

• Script Engine

  • Fixed a bug where command expressions that return string values ​​did not work.

• Project Conversion

  • Fixed a bug that caused the report function to work abnormally when executing the Legacy project after converting it to the PRO version project.Fixed a bug where the runtime does not run when converting to SCADA PRO and then proceeding without setting up the Historian DBUltimateAccess project report issues after conversion to UltimateAccess WebRuntime runs properly after converting to UltimateAccess web without Historian DB setup.

• Tag Editor

  User Security

  • Fixed a bug that limited the maximum and minimum number of digits in the Removed Float tag digit limits.

  • Fixed a bug where when creating an analog tag by right-clicking in the tag editor, a tag was created with the type being INT16, the minimum value being 0, and the maximum value being 65535.

  • Fixed a bug where the value was applied at runtime even after setting and clearing the final state save option.

  • Fixed bug where negative values ​​were not applied to alarm boundary values.

• Data logger

  • Fixed a bug where all collected tags could not be searched when selecting All when checking past collected data.

• Report

  • Fixed a bug where the Create Past Report button was activated even when there was no report model.

• Alarm

  • Fixed a bug where the analog alarm LL/L setting value would not be saved if 0 was entered.

  • Fixed a bug where negative numbers were not included in the alarm boundary value.

  • Fixed bug where alarm delay time unit was not displayed

  • Fixed bug where alarm sound file was not applied

• Page Recorder

  • Fixed a bug where data beyond the recording retention period was also displayed

• • Fixed a bug where an out-of-range input value could be set Right-clicking to create analog tags now sets correct default values.

  • Cleared 'Persist tag value' now resets the values at runtime startup.

  • Alarm now can have negative values set as its boundaries.

• Data logger

  • "All" option in Historical Data now searches all collected tags when reviewing past data.

• Report

  • "Create Past Report" button is now disabled when no report model exists.

• Alarm

  • LoLo and Lo alarm settings now save when set to 0.

  • Alarm boundaries now include negative numbers.

  • Alarm delay time and sound files now display and apply correctly.

• Page Recorder

  • Page record data beyond the retention period is no longer displayed.

• User Security

  • Out-of-range values are no longer accepted in the automatic logout time option.

• Others

  • Fixed a bug that prevented Ctrl+C /and Ctrl+V operations when setting the work with system shortcut prohibition optionenabled.

  • Fixed a bug that caused WatchM to close immediately when running.

  • Fixed a bug where garbage values ​​were included when copying and pasting data in the comment table editorWatchM no longer closes on launch.

  • Copying and pasting the data within the comment table no longer includes corrupted data.

New Feature

• Scheduler

  • The scheduler is an event management function based on the hourly, daily, monthly, yearly calendars. This functionality may provide the daily timetable of the project. The user can control the project according to the flow of the schedule.

• Exporting Past Report

  • Added the Function to generate and output report data based on data collected in the past datalog

• Administrator Page

  • Add an administrator page to check and manage users connected to the web server.

Notice

• Image Update

  • Updated tag database and some feature images

• Tag database

  • Changed to allow setting of decimal places where float type tags are displayed.

...

New Feature

• Python Script

  • The script function now supports scripts based on the Python language, rather than existing VB scripts.

Notice

• x64-bit Optimization

  • Designer and runtime programs now run in an optimized format for the x64 environment.

• CIMON Historian Database

  • When collecting data that has occurred in the past, such as data collection, it can be used without a storage period depending on the option.

  • Added the ability to import and export the Historian Database linked to the project.

• Project

  • Changed to allow keyboard input in the web browser when entering the user password.

• Security

  • Changed so that the ‘Login retry count’ and ‘account lockout period’ options can be used even if it is not a Part 11 project.

• Chart & Trend

  • When using tags set for data logging in charts and trends, some of the initially saved data can be viewed in ‘real-time mode’.

• Report

  • Changed so that the data collection cycle for tags designated as report tags can be set.

Bug Fix

• Tag Editor

  • Fixed some conversion errors during the loading process of existing V3.90 tag file.

...

Changes

• CIMON Historian Database

  • Directory for collecting historical data such as data logging can now be manually specified

• Chart, Trend

  • Adding a plot for real-time monitoring on the web browser is now available

  • Added expressions to control trends and some of the chart objects

• 3D

  • 3D object animation is available (Move, rotate, scale)

  • 3D objects can now have background

...

• CIMON Historian Database

  • PostgreSQL 14.2 is installed during the UltimateAccess Web installation.

• WEB SCADA

  • Running CimonX will run web-based service instead of an application.

• IEC 61850

  • Supports communication driver that meets IEC61850 standard.

• 3D Model

  • Supports 3D format-based (3ds,obj,stl,glb) objects in the project.

  • Object’s color can be modified during runtime via connecting it with a tag.

• PageRecorder

  • Under certain circumstances, the tag value changes on the specified pages can be recorded and replayed later.

• IP Camera Object

  • IP Camera’s real-time feed can be displayed on the page.

  • Supports IP cameras that support RTSP protocol.

• New Tag Editor

  • New UI

    • Easier to navigate the tag path

    • Tag search

    • Added simple edit mode that lets the user change tag properties without opening a popup

    • Fill address feature that lets the user add multiple tags with consecutive addresses in a batch

    • Added filters, ascending/descending order

Changes

• Expressions in UltimateAccess Web

  • Not all expressions from UltimateAccess Edge (v3.90) are supported in UltimateAccess Web. Please check the link to see the available expressions in UltimateAccess Web.

  • Link : 17.0 Supported Expression

• Minimum requirements for software installation

  • The minimum PC requirements for the installation is different from UltimateAccess Edge. Please check the link to see the requirements.

  • Link : 1.1 Installation

• Improved object performance

  • Chart / Trend

    • Each pen now can display up to 100k data points.

    • 16 pens will display up to 1.6M data points on one object.

    • Customizable pen color

  • Alarm Summary

    • Alarm Summary now can display up to 500k alarms.

...