...
If the official download links are out of order, an unofficial guide with alternative download links is available at (https://support.waspbarcode.com/kb/articles/windows-mobile-device-center-troubleshooting-on-windows-10).
| Note: CIMON ATIVA is not responsible for any damages or undesired behavior caused by 3rd-party software or websites. |
|---|
...
b) Double-click on [Windows Mobile-2003-based device connectivity] in the [Services] app.
...
c) Select [Log on as : Local system System account] in the [Log On] tab.
...
d) Click [OK], then reboot the system. After restarting the PC, the program should operate properly. When the device is connected, a green check mark checkmark with the word “Connected“ should appear in WMDC. Note that it may take a few seconds to establish a connection.
...
c) Go to [Online] – [Download to ATVXELXPANEL] to download the project. If there are no files in the Xpanel project directory, then you need to convert the project into a runtime project. Press [Yes].
...
Item | Description |
Full Download | Downloads the entire project with all configurations. |
Modification Download | Downloads only modified portions of the project. |
Send the data size | Displays the size of the runtime project. |
Font Data Size | Displays the size of font data in the runtime project. |
Target Folder | Specify the Xpanel memory location to save the project file to. |
Download the Editing Project | Whether or not to also download an editable version of the project (Can can be used to upload the project to XpanelDesigner later). |
Download the Font File | Whether or not to download the font file with the project. |
Keep Last Status of Virtual Tag | When this option is enabled, the values of virtual tags are maintained even after the program is closed. ※ This option is supported in XpanelDesigner V2.53 and above. |
Connected Xpanel Info | Displays the IP address of the target Xpanel when connecting by Ethernet. |
...
| - The Subnet Mask and Gateway fields should be configured to match those of the PC. These can be found using the ipconfig ‘ipconfig’ command. - Duplicate IP addresses are not allowed. Make sure the IP address you choose is not being used by another device on the network. - The Xpanel IP address must be on the same local network as the PC. If the subnet mask is set to 255.255.255.0, this means the first 3 values of the IP address must match those of the default gateway. If the subnet mask is set to 255.255.0.0, then the first 2 values must match, and so on. |
...
e) A prompt will appear. Select [OK] if you want to save the changes. In this case, the Xpanel device will restart. Select [X] if you want to go back to the configuration without saving.
...
c) Click [Select Xpanel or NP/iNP]. If the Xpanel is turned on and in the same network, it will appear on the list as shown below. Select the Xpanel to which you wish to download a project. You can see the information for the selected Xpanel at the bottom of the window.
...
d) Go to [Online] – [Download to ATVXELXPANEL] to download the project. You must first convert to a runtime project. Choose [Yes].
...
Item | Description |
Full Download | Downloads the entire project with all configurations. |
Modification Download | Downloads only modified portions of the project. |
Send the data size | Displays the size of the runtime project. |
Font Data Size | Displays the size of font data in the runtime project. |
Target Folder | Specify the Xpanel memory location to save the project file to. |
Download the Editing Project | Whether or not to also download an editable version of the project (Can can be used to upload to XpanelDesigner later). |
Download the Font File | Whether or not to download the font file with the project. |
Keep Last Status of Virtual Tag | When this option is enabled, the values of virtual tags are maintained even after the program is closed. ※ This option is supported in XpanelDesigner 2.53 and above. |
Connected Xpanel Info | Displays the IP address of the target Xpanel. |
...