GetSecurity | Returns the current security level. |
Function | n=GetSecurity() |
Description | Returns the current security level and stores the value to the variable. |
Example | Stores the current security level to the variable “Slevel”. Var Slevel; …… Slevel = GetSecurity(); |
LogOn | Logs on with the provided user information. |
Subroutine | LogOn(“UserID”,”Password”) |
Description | Logs on with the a user ID and password that is are registered to with the ‘Security’ feature. If the wrong information is used, one of the following messages will pop up. :   |
Example | Logs on with the user ID “CIMON”, password “0000”. |
...
LogOff
...
Logs out the current user.
...
Subroutine
...
LogOff();
...
Description
...
Logs out the current user.
...
Example
...
Logs out the current user.
LogOff();
GetSecurity | Returns the current security level. |
Function | n=GetSecurity() |
Description | Returns the current security level and stores the value to the variable. |
Example | Stores the current security level to the variable “Slevel”. Var Slevel; …… Slevel = GetSecurity(); |
LogOnWin | Brings up the User Log On window. |
Subroutine | LogOnWin() |
Description | Brings up the User Log On window on Xpanel. If there is no registered user in the project, the window will not appear.  Select a user and enter the password. If you enter the wrong password, a message will pop up as shown below.  You can change the password by pressing the [Password] button on the User Log On window. If you press the button, a message box will pop up asking if you want to change the password. Press the [Yes] button to continue to the ‘Change password’ dialog box.  P/W: Enter the old password. New P/W: Enter the new password. Confirm P/W: Enter the new password again. You can apply the new password to the ID by pressing the [OK] button. |
Example | Brings up the User Log On window. |
LogOff | Logs out the current user. |
Subroutine | LogOff(); |
Description | Logs out the current user. |
Example | Logs out the current user. LogOff(); |