Page Comparison

Create a new device

For creating a new device activate the menu [Tools -> ] → [I/O Devices] or the icon in the toolbar. The following picture shows the first step of in creating a new device.

I/O Device Name: Give the device a name. This name will be used in the TAG tag configuration window of the database accompanied by the Station Name‘Station Name’.

Select a network type

I/O Device Name: SAMSUNG FARA N70/700 PLUS

After selecting the OK [Ok] button of the previous step, the [Serial ‘Serial Communication Configuration] Configuration’ dialog box will be popup as shown in the following picture.

In this window, select the Device Type ‘Device Type’ as SAMSUNG ‘SAMSUNG FARA N70/N700 PLUS PLUS’ and configure the proper serial communication parameters. Ensure that those parameters are matched with the device’s configuration. See the Communication Configuration section for more information.

Create a station

Move to the [Station] tab of [Serial Communication Configuration] the ‘Serial Communication Configuration’ dialog box. In this dialog box, all the connected PLC stations can be configured and registered to the Xpanel.

Image Added

Each field can be configured with the following rules.:

Image Removed

Station Name

Give a name to the PLC. This name will be used in the database window accompanied by the Device Name‘Device Name’.

Station Type

Choose FARA ‘FARA N70/N700 PLUS PLUS’from the combo box (no other).

Network ID

N/A

Station No.

Specify an integer between 1 and 190. The PLC station number must match this number.

16Bit Data Swap

This option swaps bytes for all word- or double-word-sized data. The following diagram shows an example of byte-swapping:

Almost all data types will be influenced by this option except INT8 / UINT8 / BCD8 / UBCD8.

32Bit Data Swap

This option swaps words of all double-word-sized data. The following diagram shows an example of word swapping:

Tag values with data types INT32 / UINT32 / BCD32 / UBDC32 / FLOAT will be influenced by this option.

String Data Swap

Swaps the upper and lower bytes of string word data.

Using Checksum

This field has no effect. This driver always uses a BCC checksum.

Comm. Error Message Popup

Use a pop-up message when a communication error occurs.

Area

Symbol

Analog Tag

Digital Tag

Remark

Ext. Input/Output

R

R000 - R127

R000.0 - R127.15

LINK

L

L000 - L063

L000.0 - L063.15

Internal Relay

M

M000 - M127

M000.0 - M127.15

KEEP Relay

K

K000 - K127

K000.0 - K127.

15

Special internal Output

F

F000 - F015

F000.0 - F015.15

Word Register Timer/Counter

W

W000 - W3071