...
VNC 기능을 사용하려면 Xpanel에 탑재되어 있는 VNC 서버 기능을 실행시켜야 합니다. 다음 과정을 통해 VNC 서버를 실행시키거나 중지시킬 수 있습니다.
VNC 서버 실행 및 중지
CIMON Canvas를 통해 VNC 서버 실행 및 중지하기
...
명령식을 이용한 VNC 서버 실행 및 중지
Waiting on development.
Mobile Network Configuration
...
스마트폰 VNC 뷰어를 통한 원격 접속
Mocha VNC Lite application
Search for a mobile viewer named ‘Mocha VNC Lite’ and install the application on the smartphone.
Tap the ‘Configure’ menu in the start menu of the application.
Tap the‘ New…’ button to establish a new network configuration.
Input the parameters of the Xpanel IP, port, and password. Enter the hash sign (#) in the password field, which indicates the nonuse of passwords. Tap [Save] to save the settings.
Go back to the start menu and tap the ‘Connect’ button. You can connect to the Xpanel with the corresponding configuration.
...
Assigning a static IP address
When you wish to connect to the Xpanel via a 3G/LTE network, you must target a public IP address (append a port-forward to the public IP address for Xpanel’s with a local IP address). In the following example, you can connect to the VNC server with a static IP address or dynamic IP address. To use the VNC function in the mobile phone, a wireless network configuration is required. The following instruction explains the step for the mobile network through an IpTime device.
...
앱을 이용한 스마트폰 설정
스마트폰의 어플리케이션 상점에서 원격 서버 접속이 가능한 ‘Mocha VNC Lite’ 라는 어플리케이션을 검색하여 설치합니다.
앱을 실행한 후 시작 화면의 메뉴에서 ‘Configure’를 선택힙니다.
새로운 네트워크를 설정하기 위해 ‘New…' 항목을 선택합니다.
연결할 대상 Xpanel의 IP 주소, 포트 번호, 비밀번호를 입력합니다. 패스워드를 사용하지 않으므로 패스워드 입력란에는 # 을 입력합니다. [Save] 버튼을 눌러 설정을 저장합니다.
설정이 완료되면 초기 화면으로 돌아가 ‘Connect’ 버튼을 누릅니다. 설정한 IP를 눌러 Xpanel에 원격 접속이 가능합니다.
...
고정 IP 할당
3G/LTE 환경에서 Xpanel에 원격 접속을 하고자 하는 경우, 우선적으로 공인 IP를 할당받아야 합니다. 이후 Xpanel에 고정 IP를 할당하거나 공유기의 유동 IP를 통해 접속할 수 있습니다. 모바일에서 원격 서버 기능을 이용하려면 기본적으로 공유기를 통한 무선 네트워크 환경이 설정되어 있어야 합니다. IpTime 공유기의 설정을 예시로 하였을 경우, 설정 방법은 다음과 같습니다.
브라우저에 ‘192.168.0.1’ and click [Set up] to enter the settings window. Set remote Mgmt port by entering [Advanced Setup] -> [Firewall] -> [Mgmt Access List]를 입력하고 [설정]을 클릭해 설정 화면으로 진입합니다. [고급설정] - [보안기능] - [공유기 접속 관리]를 클릭하여 원격 관리 포트를 설정합니다.
Check the [Remote Mgmt port #] box and set the number of the ‘Management port’.
The figure below is about how to set port forwarding to assign a socket port number in the IpTime. Go to [Advanced Setup] -> [NAT/Routing] -> [Port Forwarding] in the settings window.
Assign the static IP address and socket port number used in the Xpanel. The default socket port number used in the Xpanel is 5900.
Enter the static IP address and port number of the Xpanel at the configuration box in the application[원격 관리 포트 사용] 옵션을 체크하고 관리 포트에 값을 입력합니다.
다음은 ipTime 공유기에서 소켓 포트 번호를 할당하기 위해 포트포워딩을 설정하는 내용입니다. [고급설정] - [NAT/라우터 관리] - [포트포워드 설정]을 클릭합니다.
Xpanel에서 사용할 고정 IP와 소켓 포트 번호를 입력합니다. Xpanel이 사용하는 기본 포트 번호는 5900 입니다.
앱의 설정 화면에서 고정 IP로 할당된 Xpanel의 주소와 포트 번호를 입력합니다.
...
Assigning dynamic IP address
Awaiting development.
VNC Server Password Configuration
Awaiting development.