(1) Visible
Shows or hides the object according to the tag value.
...
Item | Description | ||||
Mouse Right Button | When you select this option, you will have to right click the object in CimonX to execute an action. The check box is empty as default. | ||||
Open Page | Opens a graphic page. You can input the page’s name manually or press to select a graphic page through file browser. | ||||
Close Page | Closes a graphic page. You can input the page’s name manually or press to select a graphic page through file browser.
| ||||
Replace page | Replaces an old page with a new page. Currently selected page is entered in to [Old Page] as default. You can input the old/new page’s name manually or press to select a graphic page through file browser. When you input “*” at [Old page], all pages are closed (except static page) and a new page replaces the old page. | ||||
Write Tag Value | Writes the assigned value to the registered tag. | ||||
Write Value | You can assign a value to write at the selected tag. Write 0 or 1 for Digital Tag. For Analog Tag, write integer or floating-point number. If you wrote a value greater than 1 for the digital tag, the tag recognizes it as 1. | ||||
Write Digital Value | Configures the operation on digital tag when you touch the object. | ||||
Write Value Set | Sets the digital tag value as “1”. | ||||
Write Value Reset | Sets the digital tag value as “0”. | ||||
Write value Toggle | Reverses the digital tag value. (0→1 or 1→0) | ||||
Command Expression | You can write a command expression to execute. | ||||
Command Down | Inputs a command expression when you touch the object. | ||||
Command Up | Inputs a command expression when you release the object. | ||||
Setup Hot Key | Sets up the hot key when you touch the object. ※ Refer to ‘Hot Key’ for more information. | ||||
Write Instant Value | Writes an instant value when you touch or release the object. | ||||
Write Value Down | Inputs a value when you touch the object. | ||||
Write Value Up | Inputs a value when you release the object. | ||||
Run Inactivate Status | Inactivate status indicates that the cursor is not in range of the object.
After touching the object ([Write Value Down]), [Write Value Up] operates when the object is released regardless of the cursor’s location.
After touching the object ([Write Value Down]), [Write Value Up] operates when the object is released with the cursor on the object. | ||||
...