...
Symbol | Description | Range (word)(2) | Word Notation | Bit Notation | Type | Read Write |
P | I/O Relay | 1024 | P23 | P23A | Bit/Word | R/W |
M | Auxiliary Relay | 3072 | M23 | M23A | Bit/Word | R/W |
L | Link Relay | 1024 | L23 | L23A | Bit/Word | R/W |
K | Keep Relay | 512 | K23 | K23A | Bit/Word | R/W |
F | Special Relay | 1024 | F23 | F23A | Bit/Word | R |
T | Timer (CV) | 256 | T123 | - | Word | R/W |
C | Counter (CV) | 256 | C123 | - | Word | R/W |
D | Data Reg | 10000 | D123 | D123.A(1) | Bit/Word | R/W |
S | Special Reg. | 100 | S123 | S123.A(1) | Bit/Word | R/W |
Notes:
Specific bits from the D and S registers may be read from the PLC, but cannot be directly written to. To write to specific bits, you must target them via the word that they are in.
Note that addresses begin at 0 and go up to one less than the range. For example, the D register goes from D0000 – D9999, meaning the address D10000 would be invalid.
...
Supported Functions
The following table shows the available functions for the ‘LSIS Master-K S-Series Enet’ communication driver.
...