...
b) Go to [Online] – [Setup Link] and choose [USB].
...
c) Go Go to [Online] – [Download to XPANEL] to download the project. If there are no files in the Xpanel project directory, then you need to convert the project into a runtime project. Press [Yes].
...
d) After converting to a runtime project, you may download either the whole project ('Full Download') or only modified items ('Modification Download'). After choosing an option, press [OK].
...
Item | Description |
Full Download | Downloads the entire project with all configurations. |
Modification Download | Downloads only modified portions of the project. |
Send the data size | Displays the size of the runtime project. |
Font Data Size | Displays the size of font data in the runtime project. |
Target Folder | Specify the Xpanel memory location to save the project file to. |
Download the Editing Project | Whether or not to also download an editable version of the project (Can be used to upload the project to XpanelDesigner later). |
Download the Font File | Whether or not to download the font file with the project. |
Keep Last Status of Virtual Tag | When this option is enabled, the values of virtual tags are maintained even after the program is closed. ※ This option is supported in XpanelDesigner V2.53 and above. |
Connected Xpanel Info | Displays the IP address of the target Xpanel when connecting by Ethernet. |
...
| - The Subnet Mask and Gateway fields should be configured to match those of the PC. These can be found using the ipconfig command. - Duplicate IP addresses are not allowed. Make sure the IP address you choose is not being used by another device on the network. - The Xpanel IP address must be on the same local network as the PC. If the subnet mask is set to 255.255.255.0, this means the first 3 values of the IP address must match those of the default gateway. If the subnet mask is set to 255.255.0.0, then the first 2 values must match, and so on. |
d) Select Select [Apply this new setting] to save changes. A system reboot is required for changes to be applied.
e) A A prompt will appear. Select [OK] if you want to save the changes. In this case, the Xpanel device will restart. Select [X] if you want to go back to configuration without saving.
...
Settings for XpanelDesigner
a) Run Run XpanelDesigner and open a project to be downloaded.
...
f) If the Xpanel runtime project file is already saved in the project folder, you may instead select [Online] – [Download to Xpanel (Existing Project)] to download any modifications.
Item | Description |
Full Download | Downloads the entire project with all configurations. |
Modification Download | Downloads only modified portions of project. |
Send the data size | Displays the size of the runtime project. |
Font Data Size | Displays the size of font data in the runtime project. |
Target Folder | Specify the Xpanel memory location to save the project file to. |
Download the Editing Project | Whether or not to also download an editable version of the project (Can be used to upload to XpanelDesigner later). |
Download the Font File | Whether or not to download the font file with the project. |
Keep Last Status of Virtual Tag | When this option is enabled, the values of virtual tags are maintained even after the program is closed. ※ This option is supported in XpanelDesigner 2.53 and above. |
Connected Xpanel Info | Displays the IP address of the target Xpanel. |
...