...
If the official download links are out of order, an unofficial guide with alternative download links is available at (https://support.waspbarcode.com/kb/articles/windows-mobile-device-center-troubleshooting-on-windows-10).
| Note: CIMON is not responsible for any damages or undesired behavior caused by 3rd-party software or websites. |
|---|
Sometimes the default WMDC does settings do not allow Windows 10 to connect to devices automatically. In this case, perform the following procedure.
a) Start the Windows [Services] app. You can do this by searching for “Services” “services” in the Windows Start menu search bar and selecting it from the results.
...
d) Click [OK], then reboot the system. After restarting the PC, the program should operate properly. When the device is connected, a green check mark with the word “Connected“ should appear in WMDC. Note that it may take a few seconds to establish a connection.
...
Setup for XpanelDesigner
a) Run XpanelDesigner and open a project to be downloadeddownload to Xpanel.
b) Go to [Online] – [Setup Link] and choose [USB].
...
c) Go to [Online] – [Download to XPANEL] to download the project. If there are no files in the Xpanel project directory, then you need to convert the project into a runtime project. Press [Yes].
...
d) After converting to a runtime project, you may either download the whole project or only modified items. After choosing an option, press [OK].
...
Item | Description |
Full Download | Downloads the entire project with all configurations. |
Modification Download | Downloads only modified portions of the project. |
Send the data size | Displays the size of the runtime project. |
Font Data Size | Displays the size of font data in the runtime project. |
Target Folder | Specify the Xpanel memory location to save the project file to. |
Download the Editing Project | Whether or not to also download an editable version of the project (Can be used to upload the project to XpanelDesigner later). |
Download the Font File | Whether or not to download the font file with the project. |
Keep Last Status of Virtual Tag | When this option is enabled, the values of virtual tags are maintained even after the program is closed. ※ This option is supported in XpanelDesigner 2V2.53 and above. |
Connected Xpanel Info | Displays the IP address of the target Xpanel when connecting by Ethernet. |
| - Please note that only one Xpanel can be connected to a PC at a time, even if the PC has two or more unused USB ports. - The project will not operate correctly if the version of XpanelDesigner that was used to create the project is different from the version of the Xpanel OS that is running the project. Update Upgrade or downgrade the software until both versions are identical. |
...