Versions Compared

Version Old Version 27 New Version 28
Changes made by

SCADAPRO

SCADAPRO

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

(1)    Visible

Shows or hides the object according to the tag value.

...

Item

Description

Mouse Right Button

When you select this option, you will have to right click the object in CimonX to execute an action. The check box is empty as default.

Open Page

Opens a graphic page. You can input the page’s name manually or press  to select a graphic page through file browser.

Close Page

Closes a graphic page. You can input the page’s name manually or press  to select a graphic page through file browser.

Note

You can not CAN NOT close the opened page on that page. You can only ONLY close it on the parent page.

Action: Close Page

Replace page

Replaces an old page with a new page. Currently selected page is entered in to [Old Page] as default. You can input the old/new page’s name manually or press  to select a graphic page through file browser. When you input “*” at [Old page], all pages are closed (except static page) and a new page replaces the old page.

Write Tag Value

Writes the assigned value to the registered tag.

Write

Value

You can assign a value to write at the selected tag. Write 0 or 1 for Digital Tag. For Analog Tag, write integer or floating-point number. If you wrote a value greater than 1 for the digital tag, the tag recognizes it as 1.

Write Digital Value

Configures the operation on digital tag when you touch the object.

Write Value Set

Sets the digital tag value as “1”.

Write Value Reset

Sets the digital tag value as “0”.

Write value Toggle

Reverses the digital tag value. (0→1 or 1→0)

Command Expression

You can write a command expression to execute.

Command Down

Inputs a command expression when you touch the object.

Command Up

Inputs a command expression when you release the object.

Setup Hot Key

Sets up the hot key when you touch the object.

※ Refer to ‘Hot Key’ for more information.

Write Instant Value

Writes an instant value when you touch or release the object.

Write Value Down

Inputs a value when you touch the object.

Write Value Up

Inputs a value when you release the object.

Run Inactivate Status

Inactivate status indicates that the cursor is not in range of the object.

  1. When this option is enabled

After touching the object ([Write Value Down]), [Write Value Up] operates when the object is released regardless of the cursor’s location.

  1. When this option is disabled

After touching the object ([Write Value Down]), [Write Value Up] operates when the object is released with the cursor on the object.

...