...
Item | Description |
Tag name | You have to enter the tag name or operation expression which will become the standard for the ‘V-Move’ feature. When you use an operation expression, you have to assign a minimum and maximum value. You can find the tag with button or manually input the tag name. If the corresponding tag does not exist in database, a message pops up asking the user if they wish to add a new tag. ※ Refer to ‘Operation and Command Expressions’ for more information about operation expression. |
Data Range | Assign the range of object’s movement by minimum and maximum value. When the tag value is equal to or less than the minimum value, the object is at the starting point. When the tag value becomes greater, the object moves further from the starting point. If you enter ‘?’, the minimum and the maximum value is same as those of the tag’s. |
[Vertical Move Base]
...
Item | Description |
Virtual Action
You can use this option when you want the object to transform not by tag value but according to the specified condition.
Condition
ON
The object moves when the tag value is ON (Digital: ON, Analog: Values other than 0) or the operation expression is true.
OFF
The object moves when the tag value is OFF (Digital: OFF, Analog: 0) or the operation expression is false.
Action
Mono
The location of object changes from the minimum to the maximum.
Dual
The location of object changes from the minimum to the maximum. Then, it changes from the maximum to the minimum.
Interval
You can assign seconds to finish the one action. The object’s movement speed is affected by this value.
[Vertical Move Base]
...
Item
...
Description
...
Top
...
The object moves from top to bottom.
...
Bottom
...
The object moves from bottom to top.
...
Move
...
Assign the maximum distance of movement.
The distance is assigned in pixel unit, from 1 to 10000.
(6) H-Move
Moves the object horizontally according to the tag value. You cannot use this feature with V/H-Slider. This feature does not support the following objects; Alarm Summary, Trend, User Event Logging, Chart, Page Embedding, Switch/Lamp.
...
[Horizontal Movement]
...
Item
...
Description
...
Tag name
...
You have to enter the tag name or operation expression which will become the standard for the ‘H-Move’ feature. When you use an operation expression, you have to assign a minimum and maximum value. You can find the tag with button or manually input the tag name.
If the corresponding tag does not exist in database, a message pops up asking the user if they wish to add a new tag.
※ Refer to ‘Operation and Command Expressions’ for more information about operation expression.
...
Data Range
...
Assign the range of object’s movement by minimum and maximum value. When the tag value is equal to or less than the minimum value, the object is at the starting point. When the tag value becomes greater, the object moves further from the starting point.
If you enter ‘?’, the minimum and the maximum value is same as those of the tag’s.
...
Virtual Action
...
You can use this option when you want the object to move not by tag value but according to the specified condition.
※ Refer to ‘V-Move’ for more information about Virtual Action.
[Horizontal Move Base]
...
Item
...
Description
...
Left
...
The object moves from left to right.
...
Right
...
The object moves from right to left.
...
Move
...
Assign the maximum distance of movement.
The distance is assigned in pixel unit, from 1 to 10000.
(7) V-Fill
Fills the object with color vertically according to the tag value.
This feature does not support the following objects; as Alarm Summary, Button, Trend, User Event Logging, Log Data Sheet, Chart, Page Embedding, Switch/Lamp and Window Control.
...
[Vertical Fill]
...
Item
...
Description
...
Tag name
...
You have to enter the tag name or operation expression which will become the standard for the ‘V-Fill’ feature. When you use an operation expression, you have to assign a minimum and maximum value. You can find the tag with button or manually input the tag name.
If the corresponding tag does not exist in database, a message pops up asking the user if they wish to add a new tag.
※ Refer to ‘Operation and Command Expressions’ for more information about operation expression.
...
Data Range
...
Assign the range of object’s movement by minimum and maximum value. When the tag value is equal to or less than the minimum value, the object is not filled with the color. When the tag value becomes greater, the object is filled with the color.
If you enter ‘?’, the minimum and the maximum value is same as those of the tag’s.
Item
Description
Virtual Action
You can use this option when you want the object to be filled with color not by tag value but according to the specified condition.
Condition
ON
The object is filled with color when the tag value is ON (Digital: ON, Analog: Values other than 0) or the operation expression is true.
OFF
The object is filled with color when the tag value is OFF (Digital: OFF, Analog: 0) or the operation expression is false.
Action
Mono
The color is filled from the minimum to the maximum.
Dual
The color is filled from the minimum to the maximum. Then, it changes from the maximum to the minimum.
Interval
Top | The object moves from top to bottom. |
Bottom | The object moves from bottom to top. |
Move | Assign the maximum distance of movement. The distance is assigned in pixel unit, from 1 to 10000. |
(6) H-Move
Moves the object horizontally according to the tag value. You cannot use this feature with V/H-Slider. This feature does not support the following objects; Alarm Summary, Trend, User Event Logging, Chart, Page Embedding, Switch/Lamp.
...
[Horizontal Movement]
Item | Description |
Tag name | You have to enter the tag name or operation expression which will become the standard for the ‘H-Move’ feature. When you use an operation expression, you have to assign a minimum and maximum value. You can find the tag with button or manually input the tag name. If the corresponding tag does not exist in database, a message pops up asking the user if they wish to add a new tag. ※ Refer to ‘Operation and Command Expressions’ for more information about operation expression. |
Data Range | Assign the range of object’s movement by minimum and maximum value. When the tag value is equal to or less than the minimum value, the object is at the starting point. When the tag value becomes greater, the object moves further from the starting point. If you enter ‘?’, the minimum and the maximum value is same as those of the tag’s. |
Virtual Action | You can use this option when you want the object to move not by tag value but according to the specified condition. |
※ Refer to ‘V-Move’ for more information about Virtual Action.
[Horizontal Move Base]
...
Item | Description |
Left | The object moves from left to right. |
Right | The object moves from right to left. |
Move | Assign the maximum distance of movement. The distance is assigned in pixel unit, from 1 to 10000. |
(7) V-Fill
Fills the object with color vertically according to the tag value.
This feature does not support the following objects; as Alarm Summary, Button, Trend, User Event Logging, Log Data Sheet, Chart, Page Embedding, Switch/Lamp and Window Control.
...
[Vertical Fill]
Item | Description |
Tag name | You have to enter the tag name or operation expression which will become the standard for the ‘V-Fill’ feature. When you use an operation expression, you have to assign a minimum and maximum value. You can find the tag with button or manually input the tag name. If the corresponding tag does not exist in database, a message pops up asking the user if they wish to add a new tag. ※ Refer to ‘Operation and Command Expressions’ for more information about operation expression. |
Data Range | Assign the range of object’s movement by minimum and maximum value. When the tag value is equal to or less than the minimum value, the object is not filled with the color. When the tag value becomes greater, the object is filled with the color. If you enter ‘?’, the minimum and the maximum value is same as those of the tag’s. |
[Vertical Fill Base]
...
Item | Description | |
Top | The color is filled from top to bottom. | |
Middle | The color is filled from middle to both sides. | |
Bottom | The color is filled from bottom to top. | |
Fill Range | Fills the object before the execution of CimonX. From 0% to 99% can be assigned. | |
Unfill Range | Leaves the object blank before the execution of CimonX. From 1% to 100% can be assigned. | |
Color | Pen | Selects the color of object’s outline. |
Fill | Selects the color to fill in the object. | |
...
Item | Description |
Tag name | You have to enter the tag name or operation expression which will become the standard for the ‘H-Fill’ feature. When you use an operation expression, you have to assign a minimum and maximum value. You can find the tag with button or manually input the tag name. If the corresponding tag does not exist in database, a message pops up asking the user if they wish to add a new tag. ※ Refer to ‘Operation and Command Expressions’ for more information about operation expression. |
...
Data Range | Assign the range of object’s movement by minimum and maximum value. When the tag value is equal to or less than the minimum value, the object is not filled with the color. When the tag value becomes greater, the object is filled with the color. If you enter ‘?’, the minimum and the maximum value is same as those of the tag’s |
Virtual Action
. |
※ Refer to ‘V-Fill’ for more information about configuration of Virtual Action.
...
※ Please refer to ‘Security’ for more information.
(10) H-Slider
Slides the object horizontally and changes the tag value according to the coordinate. You cannot use this feature with V/H-Move, Touch and EntryData. This feature does not support the the following objects; Alarm Summary, Button, Trend, User Event Logging, Log Data Sheet, Chart, Page Embedding, Switch/Lamp and Window Control.
...
Item | Description |
Tag Name | You have to enter the tag name or operation expression which will become the standard for the ‘H-Slider’ feature. You can find the tag with button or manually input the tag name. If the corresponding tag does not exist in database, a message pops up asking the user if they wish to add a new tag. ※ Refer to ‘Operation and Command Expressions’ for more information about operation expression. |
Pen | Selects the color of object’s outline when color changes. |
Fill | Selects the color to fill in the object when color changes. |
...
[Cond.]: You can set a condition on [Color] according to tag value.
...
Item | Description | ||
Mouse Right Button | When you select this option, you will have to right click the object in CimonX to execute an action. The check box is empty as default. | ||
Open Page | Opens a graphic page. You can input the page’s name manually or press to select a graphic page through file browser. | ||
Close Page | Closes a graphic page. You can input the page’s name manually or press to select a graphic page through file browser. | ||
Replace page | Replaces an old page with a new page. Currently selected page is entered in to [Old Page] as default. You can input the old/new page’s name manually or press to select a graphic page through file browser. When you input “*” at [Old page], all pages are closed (except static page) and a new page replaces the old page. | ||
Write Tag Value | Writes the assigned value to the registered tag. | ||
Write Value | You can assign a value to write at the selected tag. Write 0 or 1 for Digital Tag. For Analog Tag, write integer or floating-point number. If you wrote a value greater than 1 for the digital tag, the tag recognizes it as 1. | ||
Write Digital Value | Configures the operation on digital tag when you touch the object. | ||
Write Value Set | Sets the digital tag value as “1”. | ||
Write Value Reset | Sets the digital tag value as “0”. | ||
Write value Toggle | Reverses the digital tag value. (0→1 or 1→0) | ||
Command Expression | You can write a command expression to execute. | ||
Command Down | Inputs a command expression when you touch the object. | ||
Command Up | Inputs a command expression when you release the object. | ||
Setup Hot Key | Sets up the hot key when you touch the object. ※ Refer to ‘Hot Key’ for more information. | ||
Write Instant Value | Writes an instant value when you touch or release the object. | ||
Write Value Down | Inputs a value when you touch the object. | ||
Write Value Up | Inputs a value when you release the object. | ||
Run Inactivate Status | Inactivate status indicates that the cursor is not in range of the object.
After touching the object ([Write Value Down]), [Write Value Up] operates when the object is released regardless of the cursor’s location.
After touching the object ([Write Value Down]), [Write Value Up] operates when the object is released with the cursor on the object. | ||
[Touch Shape]
Item | Description |
Beep Sound | Plays the beep sound when the object is touched. |
Touch Color | Changes the color when the object is touched. |
...