...
Item | Description |
Use windows ID | Lets the user use Windows account to login. |
Enable sign-in count limits | When enabled, the user can only attempt to login in a set number of times. |
Account lockout time (minutes) | Sets the amount of time to lockout the account login attempts. |
Number of login attempts | Sets the number of login attempts. Exceeding this number will lockout the account for the set amount of time. |
Enable minimum password length | Sets the minimum length to the password. |
Include at least one number and letter | When TRUE, the password must include at least one number and letter. |
Include at least one special character | When TRUE, the password must include at least one special character. |
Enable password reset interval | When enabled, the user must change the password after a set amount of time. |
Request to change password on first login | When TRUE, the user must change the password on their first login. |
Prohibit consecutive duplicate characters | When enabled, the user must set the password without repeating the same character (amount may vary depending on the settings). |
Prohibition of resetting previous passwords | The modified password is stored as configured. Stored passwords prohibit reset. (1 to 30) |
(3) New User
...
Item | Description | |
User ID | Enter the user ID to use in CimonX. You can use special characters. | |
Level | Assign a security level to the current user ID. You can assign the security level from 1 to 100. The lower number indicates the higher authority. The default value assigned to the ‘Base Security Level’ is 100. | |
Name | Designate the user’s name. You can use special characters. | |
Password | Configure the password of the user ID. If you are setting the password for the first time, following window will appear.  | |
Password | This is used to setup the password for the project. The password has to be entered with following criteria.
| |
Confirm Password | Enter the password again. | |
Change Password | When there is a previously configured password, a following [Change Password] dialog box will appear. You can change the password by entering the current password in the text field. | |
OK | Saves the password setting. | |
Cancel | Does not set up the password and goes back to the [Security Properties] window. | |
User Limit Time | Sets the due date of the account. | |
User Group | Select a user group of an object or a feature. You can assign a group A to P. The group can be duplicate. If the user group is different from the current user, the user cannot manipulate the object. | |