Please note that Canvas can still communicate with these devices via Modbus if the specific protocol necessary for a given device is unavailable. For more information on a specific device type, refer to the Supported Communication Drivers section.
...
| Child pages (Children Display) |
|---|
General Configuration
Please know that general configuration will appear regardless of the selected Connection Type and Device Type.
...
Item
Description
Item | Description |
|---|---|
Device Name | Allows the user to assign a name for the selected I/O device. |
Device Protocol | Allows the user to select a protocol for a device. |
Timeout (ms) | The maximum time to wait with no response before assuming a communication failure. |
Retry Count | Set the number of retries for sending a frame when communication fails. |
Swap 16 (16-bit Data Swap ) | This option swaps bytes for all word or double-word-sized data. The following diagram shows an example of byte-swapping:  Almost all data types will be influenced by this option except INT16 / UINT16 |
Swap 32 (32-bit Data Swap) | This option swaps words of all double-word-sized data. The following diagram shows an example of word swapping:  Tag values with data types INT32 / UINT32 / BCD32 / UBDC32 / FLOAT will be influenced by this option. |
Swap String | Swaps the upper and lower bytes of string word data. |
String Encoding | Specifies the encoding method for reading and writing string values stored on the device. This option can be overridden for individual tags in the Edit Tag menu. |
String Encoding Method | When an invalid character is encountered, the gateway will do one of the following:
|
Additional Configuration - Device Specific
Omron HostLink
...
Serial Port | Select a serial communication port for the Xpanel. |
COM1: RS422/485 | |
Baudrate | 300- |
230400 bps is supported. The range may vary according to the I/O device. | |
Parity | Select the same parity (None, Even, Odd) as the device. |
Data Bits | Select the same data bit setting ( |
7 Bits, 8 Bits) as the device. | |
Flow Control | The amount of data being transmitted to itself using the serial communication method can be turn On, Off, or Control. |
Stop Bits | Select the same stop bit setting (1-Bit or 2-Bit) as the device. |
CIMON CI-bus (CIMON-PLC)
...
Additional Configuration - Device Specific
Modbus RTU
...
Item | Description |
|---|
PLC Type
Enter the model of PLC for the target device.
Serial Port
Select a serial communication port for the Xpanel. The port will vary depending on the Xpanel model:
Baudrate
300-115200 bps is supported.
Parity
Select the same parity (None, Even, Odd) as the device.
Data Bits
Select the same data bit setting (5 Bits, 6 Bits, 7 Bits, 8 Bits) as the device.
Flow Control
The amount of data being transmitted to itself using the serial communication method can be turn On, Off, or Control.
Stop Bits
Select the same stop bit setting (1-Bit or 2-Bit) as the device.
Modbus RTU
...
Item
...
Description
...
Serial Port
...
Select a serial communication port for the Xpanel. The port will vary depending on the Xpanel model:
...
Baudrate
...
300-115200 bps is supported.
...
Parity
...
Select the same parity (None, Even, Odd) as the device.
...
Data Bits
...
Select the same data bit setting (5 Bits, 6 Bits, 7 Bits, 8 Bits) as the device.
...
Flow Control
...
The amount of data being transmitted to itself using the serial communication method can be turn On, Off, or Control.
...
Stop Bits
...
Select the same stop bit setting (1-Bit or 2-Bit) as the device.
LSIS Cnet
...
Item
...
Description
...
PLC Type
...
Enter the model of PLC for the target device.
...
Serial Port
...
Select a serial communication port for the Xpanel. The port will vary depending on the Xpanel model:
...
Baudrate
...
300-115200 bps is supported.
...
Parity
...
Select the same parity (None, Even, Odd) as the device.
...
Data Bits
...
Select the same data bit setting (5 Bits, 6 Bits, 7 Bits, 8 Bits) as the device.
...
Flow Control
...
The amount of data being transmitted to itself using the serial communication method can be turn On, Off, or Control.
...
Stop Bits
...
Select the same stop bit setting (1-Bit or 2-Bit) as the device.
Mitsubishi MELSEC Serial
...
Item
Description
PLC Type
Enter the model of PLC for the target device.
Serial Port
Select a serial communication port for the Xpanel. The port will vary depending on the Xpanel model:
Baudrate
300-115200 bps is supported.
Parity
Select the same parity (None, Even, Odd) as the device.
Data Bits
Select the same data bit setting (5 Bits, 6 Bits, 7 Bits, 8 Bits) as the device.
Flow Control
The amount of data being transmitted to itself using the serial communication method can be turn On, Off, or Control.
Stop Bits
Select the same stop bit setting (1-Bit or 2-Bit) as the device.
Sum Check
Swap 16 | Denotes whether to swap the order of the BYTEs within each WORD when reading/writing INTEGER types with this device. |
Swap 32 | Denotes whether to swap the order of the WORDs within each DWORD when reading/writing INTEGER types with this device. |
Swap 64 | Denotes whether to swap the order of the DWORDs within each QWORD when reading/writing INTEGER types with this device. |
Swap String | Denotes whether to swap the order of the BYTEs within each WORD when reading/writing STRING types with this device. |
Swap Float 16 | Denotes whether to swap the order of the BYTEs within each WORD when reading/writing float (FLOAT32) types with this device. |
Swap Float 32 | Denotes whether to swap the order of the WORDs within each DWORD when reading/writing float (FLOAT32) types with this device. |
Swap Double 16 | Denotes whether to swap the order of the BYTEs within each WORD when reading/writing double (FLOAT64) types with this device. |
Swap Double 32 | Denotes whether to swap the order of the WORDs within each DWORD when reading/writing double (FLOAT64) types with this device. |
Swap Double 64 | Denotes whether to swap the order of the DWORDs within each QWORD when reading/writing double (FLOAT64) types with this device. |
Mitsubishi MELSEC Serial
...
...
Item
...
Description
...
Serial Port
...
Select a serial communication port for the Xpanel. The port will vary depending on the Xpanel model:
...
Baudrate
...
300-115200 bps is supported.
...
Parity
...
Select the same parity (None, Even, Odd) as the device.
...
Data Bits
...
Select the same data bit setting (5 Bits, 6 Bits, 7 Bits, 8 Bits) as the device.
...
Flow Control
...
The amount of data being transmitted to itself using the serial communication method can be turn On, Off, or Control.
...
Stop Bits
...
Select the same stop bit setting (1-Bit or 2-Bit) as the device.
Yokogawa FA-M3
...
Item
Description
Serial Port
Select a serial communication port for the Xpanel. The port will vary depending on the Xpanel model:
Baudrate
300-115200 bps is supported.
Parity
Select the same parity (None, Even, Odd) as the device.
Data Bits
Select the same data bit setting (5 Bits, 6 Bits, 7 Bits, 8 Bits) as the device.
Flow Control
The amount of data being transmitted to itself using the serial communication method can be turn On, Off, or Control.
Stop Bits
Item | Description |
|---|---|
Frame Type | Frame Type is used to verify that data in a packet was transmitted/received correctly. |
Panasonic FP7
...
Only |
Station Configuration
This configuration page can be accessed by clicking Tools > I/O Device Editor… > select serial device, then click Station.
...